The connection diagrams represent typical installations. These diagrams may not work with certain inhouse cable
systems, master antenna installations, or situations where TV programming is delivered using methods that differ from
industry accepted practices. If you require assistance with connections, please contact Panasonic at 1-800-211-7262
(for U.S.A.) or 1-800-561-5505 (for Canada).
Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite Receiver)
If your TV does not have AV IN terminals (➔ 61).
Note: The terminals on the rear of your TV may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
To a household AC outlet
(AC 120 V, 60 Hz)
75 Ω
coaxial
cable from the wall or antenna signal to the “RF IN” on the unit.
75 Ω
coaxial cable
(included)
from the “RF OUT” on the unit to the “VHF/UHF RF IN” on the TV.
Audio/video cable
(included)
from the “OUT” on the unit to the “AV IN” on the TV.
AC power supply cord
(included)
from the “AC IN~” on the unit to a household AC outlet.
•
Basic Connection
Cable from the wall or
antenna signal
To Next Page
Loading...
