EasyManua.ls Logo

Panasonic DMR-XW440

Panasonic DMR-XW440
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Convenient functions
SQT0134
75
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- File Conversion (> 40)
- Copying to a DVD-R, DVD-RW, +R and +RW.
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
•On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
Off:
Signals are output as 96 kHz.
The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
Dolby Digital
DTS
MPEG
Select the audio signal to output.
Select “PCM” when the connected
equipment cannot decode the respective
audio format.
Not making the proper settings may result in
noise.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for Digital Broadcast
If the programme has more than one track (Dolby
Digital, MPEG, etc.), you can set priorities.
This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the title
recorded in DR mode.
- File Conversion (> 40)
- Normal speed copy from the title recorded in
DR mode. (> 42)
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio, priority
is given to what you select.
This setting will give effect in the following
cases.
- Timer recording (> 27)
- File Conversion (> 40)
- Normal speed copy in HG, HX, HE, HL or HM
mode from a title recorded in DR mode.
(> 42)
DMRXW440GL_eng.book 75 ページ 2014年2月6日 木曜日 午前11時29分

Table of Contents

Related product manuals