EasyManua.ls Logo

Panasonic DMR-XW440

Panasonic DMR-XW440
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Convenient functions
SQT0134
79
Others
Standby Settings
Quick Start
•On:
It is possible to start quickly from standby
mode.
Off:
Power consumption in standby mode is
minimized. (> 94)
However, startup time from standby mode
will be longer.
Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes.
When “Home Network function” (> 78) or “Remote
Recording function” (> 77) is set to “On”, the setting
for this function is fixed to “On”.
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
When “REWIND LIVE TV” is set to “On”
(> 73), “Off” cannot be selected.
Automatic Standby after OTR
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 25).
Automatic Standby after Copy
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 44, Copying from
media other than HDD with DIRECT
NAVIGATOR, Copying titles with copying
list).
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
If “On” is selected, the aerial signal is output
from this unit.
Power Save for Network Standby
You can minimize power consumption in
standby mode even when the “Quick Start
function is activated. (> 94)
When this is set to “On”, startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
Use “DVD 1”, the factory set code, under
normal circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
DMRXW440GL_eng.book 79 ページ 2014年2月6日 木曜日 午前11時29分

Table of Contents

Related product manuals