Recording
VQT2J62
31
1 While watching broadcast
Press [STATUS ].
2 Display the programme to record in the
digital channel information (> 21).
3 Press the “Yellow” button.
4 Go to step on page 28, “Timer
recording”.
≥You cannot change “Channel” and “Day/Date”.
Press [INPUT SELECT] or [WXCH] to display the
programme that you want to stop recording on the TV
screen while 2 programmes are simultaneously recording.
1 Press [∫].
e.g.,
2 Select “Yes”, then press [OK].
If you stop a timer recording, it will be cancelled.
However, if you have already set a weekly, daily timer
recording, the recording will start at the next
scheduled time.
≥Depending on the state of the unit, playback may stop
when recording begins.
≥Timer recordings do not begin while copying in normal
speed mode.
≥If you should turn the unit off during the timer recording,
the recording is continued.
≥When you programme successive timer recordings to
start, last 1 minute of those programme will not be
recorded.
First 1 minute of the following programme is not recorded.
Starting of the timer recording while executing other
operation (> 95)
Timer recording from digital
channel information
To cancel recording when timer
recording has already begun
Stop Recording
Yes
No
Timer recording of this programme in progress.
Stop this timer recording ?
Recording [ ]
OK
RETURN
Notes on timer recording
Not recorded
Programme
Recorded Recorded
Programme
DMRXW480&380GL-VQT2J62_eng.book 31 ページ ２０１０年２月１９日 金曜日 午後５時２分
To Next Page
Loading...
