Panasonic DMR-XW480

Convenient functions
VQT2J62
81
¾ Deep Colour Output
This setting for selecting whether to use Deep Colour
output when a television that supports Deep Colour is
connected.
¾ HDMI Audio Output
Select “Off” when connected to TV with HDMI cable,
and connected to amplifiers not compatible with HDMI
with a DIGITAL AUDIO OUT terminal
¾ Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
¾ VIERA Link
Set to use “HDAVI Control” function when connected
with an HDMI cable to a device that supports “HDAVI
Control”.
≥Select “Off” when you do not want to use “HDAVI
Control”.
∫ Component Resolution
This sets the video output resolution when using the
component video terminal.
≥You cannot change the setting while the “HDMI Video
Mode” is set to “On”.
Set the “HDMI Video Mode” to “Off”.
≥If it is set to “720p”, images other than “720p” will be output
as “1080i”.
≥Even if you select “720p” or “1080i”, the video output
resolution is restricted to “576p/480p” when HD contents
recorded on this unit, DVD-Video discs and DivX recorded
at a rate of 50 field per second and images via AV1, AV2 or
DV input are output from the COMPONENT VIDEO OUT
terminals.
∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (> 19)
∫ Network Settings
¾ IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
¾ Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
¾ Internet Content Settings
¾ Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (> 74)
¾ Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select “Off” when the audio is warped.
¾ Home Network ( DLNA ) Settings
You will be able to access this unit from Panasonic
DLNA compatible equipment on the network by
registering them to this unit. (> 66)
It is also possible to change the name of this unit on the
network.
¾ Server ( DLNA ) Settings
By allowing access from non-Panasonic DLNA
compatible equipment on the network, it allows them to
access this unit. (> 66)
Network

≥ “Connection Speed Setting" is enabled only when “Connection
Speed Auto-configure” is turned “Off”.
DMRXW480&380GL-VQT2J62_eng.book 81 ページ ２０１０年２月１９日 金曜日 午後５時２分