EasyManua.ls Logo

Panasonic DMR-XW480

Panasonic DMR-XW480
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Convenient functions
VQT2J62
79
Digital Audio Output
¾ PCM Down Conversion
Select how to output audio with a sampling frequency
of 96 kHz.
It will be converted to 48 kHz regardless of the setting
in following cases.
The signals have a sampling frequency of over
96 kHz.
The disc has copy protection.
If “Off” is selected, signals are output as 96 kHz
If “On” is selected, signals are converted to 48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz.)
¾ Dolby Digital
¾ DTS
¾ MPEG
Select the audio signal to output.
Audio Type for XP Recording
Choose the audio type when recording or copying with XP
mode.
The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than
XP.
Audio Type for DV Input
You can select the kind of audio when recording from the
unit’s DV input terminal (> 60).
If “Mix” is selected, both Stereo 1 and Stereo 2 are
recorded.
When recording bilingual broadcast, select the type of
audio in advance from “Bilingual Audio Selection” (> 78).
Audio Type for Digital Broadcast
If programme has both Dolby Digital and MPEG audio
tracks, priority is given to what you select.
This setting will give effect in the following conditions.
When recorded in HG, HX, HE, HL, HM, XP, SP, LP, EP
or FR mode.
DR File Conversion (> 43)
Normal speed copy from the title recorded in DR mode.
(> 45, 47)
Audio for HG / HX / HE / HL / HM
Recording
If programme has multi channel audio, priority is given to
what you select.
This setting will give effect in the following conditions.
Selected audio is recorded when recorded in HG, HX,
HE, HL or HM mode.
Convert to HG, HX, HE, HL or HM mode in “DR File
Conversion” (> 43)
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Not making the proper settings may result in noise.
Dolby Digital Apart from stereo (2ch) audio, these
signals can also be multi-channel audio.
MPEG An audio compression method that
compresses audio to small size without
any considerable loss of audio quality.
DMRXW480&380GL-VQT2J62_eng.book 79 ペー 010年2月19日 金曜日 午後5時2分

Table of Contents

Related product manuals