1. Introduction and Installation
11
6 Hold the left cover release lever (9), and then pull
open the left cover (j).
7 Install the drum and toner unit (l) by holding the
centre handle.
L Make sure that the arrows (m) match to install
the drum and toner unit correctly.
8 Close the left cover.
When to replace the toner cartridge and the drum
cartridge
When the display shows the following, replace the toner
cartridge.
Caution:
L During or immediately after printing,
the fuser unit (k) gets hot. Wait until
the fuser unit cools down.
j
9
k
l
m
To Next Page
Loading...
