EasyManua.ls Logo

Panasonic DP-MB300

Panasonic DP-MB300
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8. Programmable Features
59
8.3 Fax features
Feature/Code Selection
Changing the TEL/FAX
delayed ring count
{#}{2}{1}{2}
If you use an extension telephone in TEL/FAX mode, select the desired number
of times the extension telephone rings before the unit answers the call.
{1} 1
{2} 2 (default)
{3} 3
{4} 4
{5} 5
{6} 6
{7} 7
{8} 8
{9} 9
Note:
L See page 50 for details.
Erasing all items stored for
the one-touch dial and
navigator directory
{#}{2}{8}{9}
{0} NO (default)
{1} YES
L Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. {Y} i {#}{2}{8}{9}
2. Press {1} to select YES. i {OK}
3. Press {1} to select YES. i {OK} i {Y}
Printing a sending report
{#}{4}{0}{1}
{0} OFF: Sending reports will not be printed.
{1} ON: A sending report will be printed after every fax transmission.
{2} ERROR (default): A sending report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
{#}{4}{0}{2}
{0} OFF: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{1} ON (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 43).
Changing the receiving mode
in the manual answer setting
{#}{4}{0}{4}
{1} TEL (default): Telephone mode (page 50)
{2} TEL/FAX: Telephone/Fax mode (page 50)
Sending documents
overseas
{#}{4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{0} OFF: Deactivates this feature.
{1} NEXT FAX: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{2} ERROR (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.

Table of Contents

Other manuals for Panasonic DP-MB300

Related product manuals