Panasonic DP-MB300

3. Preparation
19
3.3 Dialling mode
Important:
L Not available when “U.K.” is selected in feature
#114 on page 55.
If you cannot dial (page 43), change this setting
according to your telephone line service.
1 {Y}
2 Press {#}{1}{2}{0} to display “DIALLING MODE”.
3 Press {1} or {2} to select the desired setting.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
4 {OK}
5 Press {Y} to exit.
3.4 Selecting the operation mode
(Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
– {A/B}: Select this mode when using the unit as a
scanner (page 32).
– {D}: Select this mode when using the unit as a
copier (page 36).
– {K}: Select this mode when using the unit as a fax
machine (page 43).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
{OK}
{Y} (Menu)