Panasonic DP-MB300

3. Preparation
23
3.9 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1 {Y} i {#}{1}{0}{2} i {OK}
LOGO=|
2 Enter your logo, up to 30 characters (see page 72 for
character entry). i {OK}
3 Press {Y} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
character, and make the correction.
L To erase all characters, press and hold {W}.
3.10 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
1 {Y} i {#}{1}{0}{3} i {OK}
NO.=|
2 Enter your fax number, up to 20 digits.
L To enter a “+”, press {*}.
L To enter a space, press {#}.
L To enter a hyphen, press {R}.
L To erase a number, press {W}.
3 {OK}
4 Press {Y} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
L To erase all numbers, press and hold {W}.
{OK}
{Y} (Menu)
{<}{>} {W} (Stop) {OK}
{Y} (Menu)
{<}{>}
{W} (Stop)
{R} (Recall)