8. Programmable Features
55
8.2 Basic features
Feature/Code Selection
Setting the date and time
{#}{1}{0}{1}
Enter the date and time using the dial keypad. See page 22 for details.
Setting your logo
{#}{1}{0}{2}
Enter your logo using the dial keypad. See page 23 for details.
Setting your fax number
{#}{1}{0}{3}
Enter your fax number using the dial keypad. See page 23 for details.
Selecting the language
{#}{1}{1}{0}
The display and reports will be in the selected language.
{1} “ENGLISH” (default): English is used.
{2} “GERMAN”: German is used.
{3} “SPANISH”: Spanish is used.
{4} “PORTUGUESE”: Portuguese is used.
1. {Y} i {#}{1}{1}{0}
2. Press {1} to {4} to select the desired language. i {OK} i {Y}
Setting the location where
you use
{#}{1}{1}{4}
This setting must match your location.
L The language setting is also available (feature #110 on page 55).
{1} “U.K.” (default): To use in United Kingdom and Ireland.
{2} “GERMANY”: To use in Germany.
{3} “SPAIN”: To use in Spain.
{4} “PORTUGAL”: To use in Portugal.
Setting the dialling mode
{#}{1}{2}{0}
{1} “PULSE”
{2} “TONE” (default)
Note:
L Not available when “U.K.” is selected in feature #114 on page 55.
L See page 19 for details.
Setting recall/flash time
{#}{1}{2}{1}
The recall/flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms”
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L The default may vary depending on feature #114 setting.
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
{#}{1}{4}{5}
{1} “NORMAL” (default)
{2} “DARKER”
To Next Page
Loading...
