Panasonic DVD-CV50

| Other methods of play |
A Canceling playback control
Wen]
amd,
Press [E STOP] after the menu screen
appears (after step 5 on page 12).
“PBC” will be cleared from the units FL display.
2 Press the numeric buttons to select a
track.
Play begins.
e Refer to the jacket etc. of the disc concerned for the track
numbers.
Press [1] to start play from the beginning of the disc.
To select a 2-digit number
Example: To select track 23
Press [210], then [2] and [3].
To return to menu play
Press [Æ STOP] to stop play, press [MENU], and press the numeric
buttons to select an item.
“PBC” lights on the unit's FL display.
B_-Using:menus to play
DVD
By calling up menus during play, you can start play from a specific
title or chapter, or change the soundtrack and subtitle languages.
{| Press [TOP MENU] or [MENU] during
‘play to display the menu.
Press again to return to what you were watching.
2 Press the cursor buttons [A, V, 4,
>) to select an item and press
[ENTER].
The selected item is confirmed.
ə Repeat if other menus are shown.
DVDs can have several menus. The menu displayed when you press
[TOP MENU] may be different to the menu displayed when you press
[MENU].
For your reference
Menu content depends on the disc. These operating instructions
describe the basic steps.
¢Both buttons take you to the same menu if the disc has only one
menu.
Basic Operations ia
RQT5455