Panasonic EASA-PHONE KX-T1450 - Remote Operation Guide; Configuring Remote Access Code

How to Operate from a Remote Phone
On the following pages, we explain how to:
n SETTING THE REMOTE CODE
w PLAYING BACK MESSAGES
n PLAYING BACK NEWLY-RECORDED MESSAGES (MEMORY PLAYBACK)
H REWINDING/FAST FORWARDING TAPE WHILE HEARING THE MESSAGES
n RECORDING A MARKER MESSAGE
n RESETTING THE ICM TAPE FOR FUTURE MESSAGES
n MONITORING ROOM SOUND
n CHANGING THE OUTGOING MESSAGE
n SKIPPING THE OGM FOR ICM RECORDING
n SETTING/CANCELLING THE ANSWER MODE
SETTING THE REMOTE CODE
To get remote access, you must set and remember your remote code number.
The REMOTE CODE number is made up of 2 digits, the first digit is factory preset, and
the second digit is selectable. (“2” or “8”)
REMOTE CODE
I
t I
Remote Code number. The second digit is
selectable (2 or 8).
EXAMPLE: If the factory preset number is “4”, then your code number may be either
“42” or “48”, depending on the position of the selectable REMOTE code
switch.
- 14-