Preparation
CASSETTE TAPE INSTALLATION
1 Open the panel, and insert the Outgoing
Message (OGM) and Incoming Message
(KM) tapes as shown.
l
TWO cassette tapes are included. Use
Cl5 for OGM and C60 for ICM.
@Do not use endless loop cassette tape.
2 Connect the AC adaptor to the AC outlet.
3 Set the POWER ON/OFF switch to ON.
l
The unit will start to reset the OGM tape.
NOTES:
03 minutes after connecting the AC adaptor,
the unit will be powered ON automatically
and reset the OGM tape even when the
POWER ON/OFF switch is not set to ON.
l
After you have changed the OGM tape:
Push OGM PLAY and REW simultaneously
to reset the OGM tape.
-6-
To Next Page
Loading...
