- 67 -
Recording is done continuously at the rate of 50 still pictures per second.
Use this function to record an object with fast movement.
1 Select the menu.
2 Press the button.
≥ flashes in red during recording.
≥ First press the button halfway, then press it fully to set the focus and record. It will
automatically focus if you press fully once, so it is convenient when recording objects
moving back and forth.
3 Touch [Record] or [Delete].
4
(When [Record] is selected in Step 3)
Touch [REC ALL] or [SELECT].
5
(When [SELECT] is selected in Step 4)
Touch the range of pictures that will be stored.
≥ Previous (Next) page is displayed by touching /
.
* Only select the picture for start point if only 1 picture is
to be stored.
≥ A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish point.
Touch [YES] to store the pictures.
[HI-SPEED BURST]
: [PICTURE] # [HI-SPEED BURST] # [ON]
[ON]: 180 still pictures are recorded continuously at the rate of 50 per second.
The picture size is (1920k1080).
[OFF]: Cancel the setting.
[Record]: Pictures are stored.
[Delete]: All pictures are deleted.
2.1
M
[REC ALL]: All pictures are stored.
[SELECT]: Pictures are stored by specifying range.
A Start point
*
B Finish point
To Next Page
Loading...
