- 79 -
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
≥ The memorised resume position is cleared if you turn off the unit or change the mode. (The
setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback
(Playback zoom)
You can zoom in by touching a still picture during playback.
1 Touch and hold the part you wish to zoom in on during still picture
playback.
≥ It will display enlarged in order of normal display (k1) # k2 # k4. Touch and hold the
screen to zoom in from the normal display k1 to k2. Touch the screen to zoom in from k2
to k4.
≥ The still picture is zoomed in on, centring on the part you touched.
2 Move to the zoomed in position by touching
/ / / or slide while touching the
screen.
≥ The location of the zoom displays for about 1 second when
zooming in (zooming out) or moving the displayed location.
≥ The more picture is enlarged, the more its quality
deteriorates.
Zooming out from the zoomed still picture
Touch to zoom out. (k4 # k2 # k1)
≥ Touch to return to normal playback (k1).
≥ You can also perform zoom operations using the zoom lever.
≥ Playback zoom cannot be performed for the still pictures recorded in 3D. It will perform the
playback zoom after switching to 2D playback when the zoom operation is performed.
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
MENU
A Displayed location of
the zoom
To Next Page
Loading...
