- 130 -
4 Enter the PIN code displayed on this unit screen into the wireless access
point.
≥ For further details, please read the operating instructions for the wireless access point.
5 Touch [NEXT].
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
≥ Confirm Encryption key of the selected wireless access point if the network authentication is
encrypted.
≥ When connecting by [Manual Setting], confirm the SSID (Identification name), Authentication
method, Encryption type, and Encryption key (Password) of the wireless access point you are
using.
∫ If this is the first time the Wi-Fi button is pressed
1 Press Wi-Fi button.
2 Touch [YES].
3 Touch [Manual Connection].
4 Select [Search for wireless network] or [Manual Setting].
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
When the preparations for the Wi-Fi function (l 123) and the Wi-Fi connection are
complete, you can use the following functions:
j [Link to Cell] (l 137)
j [DLNA Play] (l 142)
j [Live Cast] (l 143)
j [Home Cam] (l 147)
[Manual Connection]
[Search for
wireless network]:
Allows you to search for wireless access points, select one, and set it.
(l 131)
[Manual Setting]: Allows you to configure detailed settings by entering the SSID of the
wireless access point you want to connect to. (l 132)
To Next Page
Loading...
