- 131 -
∫ When setting from the Wi-Fi setup menu
1 Press Wi-Fi button.
2 Touch [Wi-Fi Setup].
3 Touch [Wireless Settings].
4 Touch the part with no display of a wireless
access point.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Wireless Settings] on page 151.
5 Touch [Manual Connection].
6 Select [Search for wireless network] or [Manual
Setting].
∫ When connecting by [Search for wireless network]
1 Touch [Search for wireless network].
2 Touch the wireless access point to connect.
≥ If you touch [Refresh], you can search for wireless access points again.
3 Touch [ENTER].
≥ If an Encryption key (Password) is not set, the connection is complete and a message is
displayed.
4 (When there is an Encryption key)
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page 65.
≥ When the entry is complete, touch [Enter].
5 (When there is an Encryption key)
Touch [NEXT].
≥ A message is displayed when the connection is complete.
[Search for
wireless network]:
Allows you to search for wireless access points, select one, and set it.
(l 131)
[Manual Setting]: Allows you to configure detailed settings by entering the SSID of the
wireless access point you want to connect to. (l 132)
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
When the preparations for the Wi-Fi function (l 123) and the Wi-Fi connection are
complete, you can use the following functions:
j [Link to Cell] (l 137)
j [DLNA Play] (l 142)
j [Live Cast] (l 143)
j [Home Cam] (l 147)
To Next Page
Loading...
