- 120 -
∫ Displaying media information
The used space of the USB HDD can be checked.
≥ Connect this unit to the USB HDD and touch [Playback HDD]
Simple copy
1 Connect this unit to the USB HDD to prepare for copying. (l 117)
2 Touch [Simple copy].
≥ When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the USB
HDD (l 121), and then perform the operation of Step 1.
3 Touch [YES].
4 Touch [EXIT] when the copy complete message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Touch [CANCEL] while copying.
Copy selected files
1 Connect this unit to the USB HDD to prepare for copying. (l 117)
2 Touch [Copy selected files].
≥ You can also copy scenes or still pictures by touching , selecting [COPY].
4 Touch the desired items following the instructions on the screen.
≥ It will return to the previous step by touching .
≥ (When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ (When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.
≥ Up to 99 scenes/ 99 dates can be selected continuously.
5 Touch [EXIT] when the copy complete message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Touch [CANCEL] while copying.
: [SETUP] # [MEDIA STATUS]
≥ If you touch [CHANGE MEDIA], you can switch the display between the SD card and USB HDD.
3 Touch [NEXT].
MENU
To Next Page
Loading...
