105
VQT1U19
5 Select the desired number of
prints, then press the cursor
button.
You can set up to 9 prints.
To cancel the setting, set the number of prints
to [0].
Up to 8 files can be set in succession by
repeating steps 4 and 5.
6 Press the MENU button to
display the PictBridge menus.
7 Select the date print setting on
[DATE PRINT].
If the printer is not capable of date printing, this
setting is unavailable.
8 Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4%5 INCH]: L size
[5%7 INCH]: 2L size
[4%6 INCH]: Postcard size
[A4]: A4 size
You cannot set paper sizes not supported on
the printer.
9 Select the desired layout setting
on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[ ]: Frame print
You cannot set page layouts not supported on
the printer.
10
Select [PRINT] [YES] and
press the cursor button to print
the pictures.
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
MENU
To Next Page
Loading...
