83
VQT1U19
Editing
4
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto
the SD card.
Select [ ] (still picture playback) of [ ] tab while the mode dial is set to .
( 76)
# What is DPOF?
DPOF (Digital Print Order Format) is a format
which allows the user of a digital camera to
define which captured images on the SD card
are to be printed, together with information on the
number of copies they wish to print. (Please
note: Not all commercial printing services
support this feature at this time.)
1 Select the menu. ( 24)
2 Select the still picture to be set,
then press the cursor button.
3 Select the number of prints, then
press the cursor button.
! To cancel the setting, set the number of prints
to [0].
! You can also select multiple still pictures in
succession.
! Press the MENU button to complete the
settings.
To cancel all DPOF settings
! When the confirmation message appears,
select [YES], then press the cursor button.
! The DPOF setting cannot be applied to still
pictures recorded on the HDD.
! Please perform the DPOF settings on this unit.
! You cannot add the recording date to pictures
to be printed with the DPOF settings.
! DPOF setting on copied still pictures will be
cleared when the still picture with DPOF
setting is copied between SD card and HDD.
[PHOTO SETUP] [DPOF SET] [SET]
[DPOF SET] [CANCEL ALL]
To Next Page
Loading...
