Panasonic HDC-SD600 - Remote Control and Indicator Settings; Remote Control Operation Settings; LCD Brightness and Alert Sounds

36
VQT2V00
Please refer to page 40.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the self-timer is counting down. When this is set to [OFF], it
does not light during recording.
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 117)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. (l 32)
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/
*(Automatic adjustment)
* It is not displayed in the manual mode or in the playback mode.
≥ When the AC adaptor is in use, the LCD monitor is set to automatically.
≥ The recordable time will become shorter when you use this unit with the LCD monitor lit up.
[REMOTE CONTROL]
[OFF]/[ON]
[REC LAMP]
[OFF]/[ON]
[ALERT SOUND]
[OFF]/ /
[POWER LCD]
////
+2
+1
0
- 1
A
+2
+1
0
- 1
A
+1