Panasonic HDC-SD600 - TV Output Connections and Settings; HDMI Mini Cable Connection; AV Multi Cable and Component Output

90
VQT2V00
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/50p recording mode is turned on/off during motion picture recording
mode
jWhen [CHANGE VIDEO] is touched during motion picture playback mode
AV multi connector output setting can be changed.
Changing the component output setting
Connecting with a HDMI mini cable
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
Connecting with the AV multi cable
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [SETUP] # [COMPONENT OUT] # desired setting
[576i]: When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)