62
VQT2V00
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ Change the mode to or .
≥ Switch to manual mode. (l 69)
1 Select the menu.
2 Touch the desired setting items.
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to complete the settings.
≥ appears on the screen.
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥ Change the mode to or .
≥ Switch to manual mode. (l 69)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (l 71).
≥ The zebra pattern does not appear on the images actually recorded.
[PICTURE ADJUST]
: [RECORD SETUP] # [PICTURE ADJUST]
[SHARPNESS]: Sharpness of the edge
[COLOUR]: Depth of the colour of the image
[EXPOSURE]: Brightness of the image
[WB ADJUST]: Picture colour balance
[ZEBRA]
: [RECORD SETUP] # [ZEBRA] # [ON]
≥ It is possible to set from the quick menu in manual
mode. (l 32)
To Next Page
Loading...
