39
VQT2V00
This item is used to start the unit demonstration.
(Only when the mode is at the or position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration
automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the optical image stabilizer demo.
(Only when the mode is at the or position)
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
You can select the language on the screen display and the menu screen.
[DEMO MODE]
[OFF]/[ON]
[O.I.S. DEMO]
[LANGUAGE]
[English]/[Deutsch]/[Français]/[Italiano]/[Svenska]/
[Español]/[Polski]/[Česky]/[Türkçe]/[Magyar]
To Next Page
Loading...
