13
Display Panel Instructions
The required settings must be selected prior to scanning.
Information and conditions are shown on the LCD (Liquid Crystal Display).
∫∫
∫∫
Display panel and keys
Ready
: Press to enter the scanning setting menu.
: Press to enter the counter setting menu.
: Press to enter the imprinter setting menu.
: Press to enter another setting menu.
: Press to exit from the setting section and
return to the ready status.
Also, this function can change the display
language.
: Used to start or stop scanning a document.
Up to 32 characters can be displayed during
scanning or setting.
3
: Press to advance to the next mode in the
selected menu.
4
: Press to return to the previous mode in the
selected menu.
1
: Press to advance to the next value in the
selected mode.
2
: Press to return to the previous value in the
selected mode.
STOP / START
HOME
OTHERS
IMPRINTCOUNTER
SCAN
SELECT
MODE
SCAN
COUNTER
IMPRINT
OTHERS
HOME
STOP / START
LCD
:
To Next Page
Loading...
