A
Ashley WardSep 5, 2025
What does error F40 mean on a Panasonic KV-S2065L?
- BBethany AdamsSep 5, 2025
If your Panasonic Scanner displays error F40, this indicates a Hopper Drive Error. The suggested solution is to replace the MAIN CONTROL Board.
To Next PageTo Next PageWhat does error F40 mean on a Panasonic KV-S2065L?
If your Panasonic Scanner displays error F40, this indicates a Hopper Drive Error. The suggested solution is to replace the MAIN CONTROL Board.
How to troubleshoot the Starting Position Sensor Error on Panasonic Scanner?
To troubleshoot a Starting Position Sensor Error (F51) on your Panasonic scanner, start by removing any dust on the LED on the STARTING POSITION LED Board, or on the light receptor on the STARTING POSITION SENSOR Board. Then, check that the LED on the STARTING POSITION LED Board, the light receptor on the STARTING POSITION SENSOR Board, and the slot location on the carrier board are properly aligned. Inspect the STARTING POSITION LED Board Cable, the RELAY ( LOWER ) Board Cable, the Starting Position Sensor Cable and the RELAY ( UPPER ) Board Cable. If the issue remains, you might need to replace the STARTING POSITION LED Board, the STARTING POSITION SENSOR Board, the RELAY ( LOWER ) Board, the RELAY ( UPPER ) Board, the MOTHER Board, or the MAIN CONTROL Board.
How do I fix an Ending (Front) Position Sensor Error on my Panasonic Scanner?
To resolve an Ending (Front) Position Sensor Error (F55) on your Panasonic scanner, first, remove any dust on the LED on the ENDING (FRONT) LED Board, or on the light receptor on the ENDING (FRONT) SENSOR Board. Also, check that the LED on the ENDING (FRONT) LED Board, the light receptor on the ENDING (FRONT) SENSOR Board and the slot location on the carrier board are properly aligned. Check the ENDING (FRONT) LED Board Cable, the Paper Jam Sensor Cable, the Ending (Front) Sensor Cable and the RELAY ( UPPER ) Board Cable. If the error remains, consider replacing the ENDING (FRONT) LED Board, the PAPER JAM SENSOR Board, the ENDING (FRONT) SENSOR Board, the RELAY ( UPPER ) Board, the MOTHER Board, or the MAIN CONTROL Board.
What is error F20 on a Panasonic KV-S2065L Scanner?
If your Panasonic Scanner displays error F20, it indicates a Shading RAM Error. The suggested solution is to replace the MAIN CONTROL Board.
What does error F50 on my Panasonic KV-S2065L Scanner mean?
If your Panasonic Scanner displays error F50, it indicates a Waiting Sensor Error. The suggested solution is to replace the STARTING POSITION Board.
What causes error F61 on a Panasonic Scanner?
If your Panasonic Scanner displays error F61, it indicates a Front Side Black Level Error. The suggested solution is to replace the MAIN CONTROL Board.
What does error F29 mean on a Panasonic KV-S2065L?
Error F29 on a Panasonic Scanner indicates a Front Gamma RAM Error. Replace the MAIN CONTROL Board to resolve this issue.
What does error F30 mean on a Panasonic KV-S2065L Scanner?
Error F30 on a Panasonic Scanner indicates a Back Gamma RAM Error. The solution is to replace the MAIN CONTROL Board.
How to troubleshoot a Waiting Sensor Error on a Panasonic KV-S2065L Scanner?
If your Panasonic Scanner displays a Waiting Sensor Error, it might be due to dust on the LED of the WAITING LED Board or on the light receptor of the WAITING SENSOR Board; try removing any dust. Ensure that the LED on the WAITING LED Board, the light receptor on the WAITING SENSOR Board, and the slot location on the carrier board are properly aligned. Check the WAITING LED Board Cable, the RELAY (LOWER) Board Cable, the Waiting Sensor Cable, and the RELAY (UPPER) Board Cable. If issues continue, consider replacing the WAITING LED Board, the WAITING SENSOR Board, the RELAY (LOWER) Board, the RELAY (UPPER) Board, the MOTHER Board, or the MAIN CONTROL Board.
What should I do if my Panasonic Scanner has a Back Side Lamp Lighting Error?
If your Panasonic scanner displays a Back Side Lamp Lighting Error (F69), start by checking the CIS ( B ) Cable and the CIS ( B ) LED Cable. If the problem continues, you may need to replace the Back Side Image Sensor, the DRIVE Board, the MOTHER Board, or the MAIN CONTROL Board.
General