Panasonic KV-S2065L - Setting the SCSI ID and Terminator

file://///serwer/instr/CD/900-999/CD945/KV-S2065L_ALL_SVC/Viewing/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0409020000.html
4.9.2 Setting the SCSI ID and Terminator
TOP PREVIOUS NEXT
1. Press the OTHERS Key.
Enters setting modes other than SCAN, COUNTER, or IMPRINT and displays the version
1. Press the MODE Key.
Press the MODE Key [
] to display the SCSI ID, which is the fourth setting.
1. Press the SELECT [
] Key or [
] Key to select the desired setting.
The [
] Key moves to the next ID as shown below.
The [
] Key moves to the previous ID.
1. Press the MODE Key [
] to switch to the terminator setting.
file://///serwer/instr/CD/900-999/CD945/KV-S2065L_AL...ng/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0409020000.html (1 z 2) [2010-08-24 21:09:02]