2 SPECIFICATION
TOP PREVIOUS NEXT
Item Model No.
KV-S2065L KV-S2065W
Scanner Scanning face Duplex scanning
Scanning method Front side: CIS (Contact Type Image Sensor)
Back side: CIS (Contact Type Image Sensor)
Scanning speed Simplex scanning: Approx. 60 ppm (Letter, fed lengthwise,
200 dpi)
Duplex scanning: Approx. 110 ipm (Letter, fed lengthwise,
200 dpi)
Resolution Main scanning direction: 100-600 dpi (1 dpi step)
Sub-scanning direction: 100-600 dpi (1 dpi step) (Same as
main scanning direction)
Optical resolution is 400 dpi.
Tonal gradation Binary mode, Grayscale mode (4/8 bit), 64-step gradation
(dither) mode, 64-step gradation (error diffusion) mode
Image control Image emphasis, Dynamic threshold (DIMM required),
Automatic threshold, Automatic separation, Monochrome
reversing, Automatic back control
Compression MH, MR, MMR
Paper Size Scanning size: 48 x 70mm
(1.9 x 2.75 in.) to 216 x
431mm (8.5 x 17 in.)
Feeding size: 48 x 70mm
(1.9 x 2.75 in.) to 305 x
838mm (12 x 33 in.)
Scanning size: 48 x 70mm
(1.9 x 2.75 in.) to 298 x
431mm (11.7 x 17 in.)
Feeding size: 48 x 70mm
(1.9 x 2.75 in.) to 305 x
838mm (12 x 33 in.)
Thickness Single paper feeding: 0.025 to 0.2mm (1.0 to 7.9 mils)
Continuous paper feeding: 0.06 to 0.2mm (2.4 to 7.9 mils)
Note: 1 mil=1/1000 in.
Weight Single paper feeding: 20 to 157g/m2 (5.3 to 42 lbs.)
Continuous paper feeding: 50 to 157g/m2 (13 to 42 lbs.)
Interface (Transfer rate) SCSI 3 (20MB/sec), 50pin
Unit External dimensions(WidthxDepthxHeight) 495 x 575 x 246mm (19.5 x 22.6 x 9.7 in.)
Mass (Weight) 19kg (41.8 lbs.)
Power requirement AC100-120V, 50/60Hz
AC220-240V, 50/60Hz
Power consumption Maximum(Scanning) 1.3A (AC100-120V)/98W0.8A (AC220-240V)/98W
Minimum(Standby) 0.5A (AC100-120V)/30W0.3A (AC220-240V)/30W
Sleep mode 0.13A (AC100-120V)/11W 0.07A (AC220-240V)/11W
Operating Environment Operating temperature and humidity 15°C to 30°C (59°F to 86°F), 30% to 80% RH
Storage Environment Storage temperature and humidity 0°C to 35°C (32°F to 95°F), 10% to 80% RH
To Next Page
Loading...
