Panasonic KV-S2065L - HOPPER POSITION Board

file://///serwer/instr/CD/900-999/CD945/KV-S2065L_ALL_SVC/Viewing/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804180000.html
8.4.18 HOPPER POSITION Board
TOP PREVIOUS NEXT
1. Remove Lower Cover Plate 1. (See 8.3.5-(1))
2. Remove Conveyor Plate Lower 2. (See 8.3.2-(2))
3. Remove Hopper Unit. (See 8.2.10)
4. Push 3 Clip and remove 1 screw as shown in the Fig. 8-49 and remove the HOPPER
POSITION Board.
5. Disconnect CN511 and CN512.
TOP PREVIOUS NEXT
file://///serwer/instr/CD/900-999/CD945/KV-S2065L_A...g/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804180000.html [2010-08-24 21:11:20]