Panasonic KV-S2065L - Power Switch

file://///serwer/instr/CD/900-999/CD945/KV-S2065L_ALL_SVC/Viewing/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804220000.html
8.4.22 Power Switch
TOP PREVIOUS NEXT
1. Remove the Power Box. (See 8.4.2-(1), (2))
2. Disconnect the 2 lead terminals from the Power Switch terminal.
3. Remove the Power Switch from the chassis. (Pull out while pressing both sides of the locking
section)
WARNING (in case Power Switch and/or
lnlet are replaced)
When replacing the Power Switch or Inlet, the wiring must be installed as
illustrated./Incorrect wiring may cause a short circuit.
TOP PREVIOUS NEXT
file://///serwer/instr/CD/900-999/CD945/KV-S2065L_A...g/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804220000.html [2010-08-24 21:11:28]