Panasonic KV-S2065L - Main Control Board

file://///serwer/instr/CD/900-999/CD945/KV-S2065L_ALL_SVC/Viewing/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804010000.html
8.4.1 MAIN CONTROL Board
TOP PREVIOUS NEXT
1. Remove Side Cover (R) and Board Box Cover. (See 8.2.2 and 8.3.14)
2. Remove INTERFACE Board. (See 8.3.15)
3. Disconnect all connectors from/to MAIN CONTROL Board and MOTHER Board.
Note:
See Section 11 BLOCK DIAGRAM for connections.
Before disconnecting all connectors, unlock the claws (Locking Section) on left side of clamps
to release the cables from clamps.
1. Remove 2 screws.
2. Pull the MAIN CONTROL Board backward (10mm) and remove right side.
TOP PREVIOUS NEXT
file://///serwer/instr/CD/900-999/CD945/KV-S2065L_A...g/SGML_VIEW_DATA/ALL/KV-S2065L/SVC/s0804010000.html [2010-08-24 21:11:01]