16
Display Panel Instructions
Counter menu
No. Item LCD display Contents Page
17 Feed speed Feed Speed
Selection for feed speed when a document is being
scanned.
23
18
Save settings
(Select memory)
Save Setting
Selects the memory where the conditions are saved
into.
Save scanning
settings (Execution)
Save Setting
Saves the scanning conditions into the memory.
(2 memory settings)
19
Load scanning
setting
Load Setting
Loads the memory where the scanning conditions have
already been saved. If “Default” is selected, all of the
scanning conditions will return to the default values.
No. Item LCD display Contents Page
01
Select the counter
displayed on the LCD
Disp. Counter
Selection to choose to display the cleared counter
(scan counter) after scanning one time or to display the
user set counter (user counter) on the LCD.
24
02
Setting the User
Counter
User Counter Selection for default number before scanning.
Setting the user
counter extender
User Counter Selection for an increase in the default number.
Clear the user
counter
User Counter Clears the counter which was set by the user.
03 System Count
System
Count.
Displays the total amount of scanned documents up to
now.
To Next Page
Loading...
