Panasonic KV-S2065L - Page 21

21
Display Panel Instructions
06 Back side dropout color Color selection
07 Back side brightness
•
When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
• “D” means dark. “L” means light.
08 Back side image emphasis
• When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Medium”.
09 Back side contrast
• When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
• “H” means high. “L” means low.
10 Back side halftone
§
1
The dynamic threshold is not displayed if the DIMM
expansion memory module has not been installed. If the
dynamic threshold is to be used, install a DIMM memory
module which is available on the market. For details on
how to install it refer to the installation manual.
11 Noise reduction
B1 a 1TB6 a 6 : Scanner reduces a black dot.
W1 a 1TW6 a 6 : Scanner reduces a white dot.
06.B.Col
 Hos t
or drop
GreenRedHost
07.B.Brightness
D
L Hos t
D4 D2D3 D1 Norm
Host
L4L3L2L1
08.B.Emp
 Hos t
hasis
NoneSmooth Low Medium
Host
High
09.B.Contrast
LH Hos t
L4 L2L3 L1 Norm
Host
H4H3H2H1
10.B.Hal
 Hos t
f tone
BinaryHost Bayer dither 64 Bayer dither 16
(Dynamic Th.)
Halftone dot 32 Error diffusionHalftone dot 64

§
1
11.No i se Reduct .
 Hos t
NoneHost B1✕1 B2✕2
B3✕3
B4✕4B5✕5
B6✕6W1✕1W2✕2
W3✕3W4✕4W5✕5W6✕6