44
Replacing Consumables
9
Take out the retard roller module in the
optional “Roller Exchange Kit (KV-
SS009)”.
For supplies and accessories:
Call 1-800-346-4768 (U. S. A. only) or
your dealer.
10
Pull the right side of the shaft in the
direction of the arrow and hold it there.
(1)
Attach the new retard roller module as
shown in the diagram on the right (2)
and then return the right side of the
shaft in the direction of the arrow. (3)
•
Confirm if pin A and pin B are inserted in
their notches correctly.
• Attach the retard roller module so that the
notch A is on the left side.
2
3
Notch A
Pin A
Pin B
Notch B
Shaft
Retard roller module
1
When the pin is not inserted in the notch
properly, it may cause double feeding or a paper
jam.
To Next Page
Loading...
