Panasonic KX-F750 - Functions During Playback; Erasing Recorded Messages

Basic Instructions
Functions during playback
REPEAT
Ci HII TEE Ty
Erasing recorded messages
PALEE ETETETT TETA
START/SET
E Repeating a message:
Press REPEAT to play back the previous
message.
E Skipping a message:
Press SKIP to skip to the next message.
E Stopping playback:
Press STOP.
—If you wish to resume playback, press the
NEW MESSAGES or ALL MESSAGES button
within 1 minute after pressing the STOP
button.
Note:
e These functions can be used while recorded
messages in a mailbox are being played back
(see page 56).
@ Erasing a specific message from memory:
Press ERASE while the message you want to
erase is being played.
E Erasing all messages from memory:
1. Press ERASE after listening to all the
messages.
ICM ERASE OK?
2. Press START/SET for confirmation.
ERASE COMPLETED
—The unit will erase all the recorded
messages in the common memory.
—lf this feature is not required, press the
ERASE button again or the STOP button
instead of the START/SET button.
Note:
e These features can be used for the mailbox
feature. To erase messages in a mailbox, you
must first select the mailbox by pressing the
MAIL BOX button (see page 56).
29