7.11.6. REGIST SENSOR
The Sensor detects whether or not the recording paper is present so that printing can start.
When the recording paper is detected, the shelter plate let the sensor light passing through, the photo-transistor turns ON, and the
input signal of IC605-5pin becomes a low level.
When there is no recording paper, the shelter plate closes the sensor light, the photo-transistor turns OFF, and the input signal of
IC605-5pin becomes a high level.
Photo-transistor Signal (IC605-5 pin)
No Recording Paper OFF High level
Recording Paper Regist ON Low level
178
KX-FL612CX / KX-FL612CX-S
To Next Page
Loading...
