CIRCUIT OPERATIONS
- 127 -
KX-FT21LA
The motor rotates CCW until the
Switch turns ON.
"Call service 2" is displayed.
END
YES
NO
The Switch is ON
Power ON
4-5-3. Mechanical Movements in the Main Operations
1. Idle status
4-5-2. Mode Operation
Once a mode is selected, the Drive Motor Gear rotates clockwise (CW) and then the Swing Gear A-1 controls the
mode operation.
A: Transmit mode
Swing Gear A-1 engages G6 and conveys its drive power to the Separation Roller Gear for pre-feeding documents.
B: Receive mode
Swing Gear B engages G8 and conveys its drive power to the Platen Roller Gear for printing the received data.
C: Copy mode
Swing Gear A-1 and B engage Gears 6 and 8 respectively and drive both the Separation Roller Gear and the Platen
Roller Gear for feeding documents and recording paper in the copying operation.
To Next Page
Loading...
