Panasonic KX-FT21BX

KX-FT21LA
- 128 -
When the document is set, in the
paper tray does the Document Sensor
(PS1) turn ON ?
The motor rotates CW and the
document is pre-fed.
Press the start key.
Does the motor rotate CW and is the
Read Position Sensor (PS2) ON?
The motor rotates CW and the document data
is scanned by the Image Sensor until the
Read Position Sensor (PS2) turns OFF.
The motor rotates cow and the
document is ejected.
END
2. Scanning
Is the recording paper installed in the
paper cassette properly ?
Is the data received ?
The motor rotates CW and the received
document is printed.
The motor rotates CCW and the recording
paper is ejected.
The motor rotates CW and the CAM is set to
the Transmit mode (A).
The motor rotates CCW and the
CAM is set to the Receive mode (B).
END
3. Printing
Note : See 4-6. SENSORS AND SWITCHES.
Press the dial key.
YES
YES
NO
YES
YES
Error is displayed.
Set the recording paper properly.
NO
See 3-11. Sensor Section (page 77.)
NO