Panasonic KX-NCP1000 - Programming the PBX; Installing the Virtual IP Cards to the PBX

4.1 Programming the PBX
4.1.1 Installing the Virtual IP Cards to the PBX
1.
a. Under Configuration, click Slot.
b. Move the mouse pointer over the small PBX image
for virtual slots.
c. Click Select Shelf.
2.
a. Click on the name of the desired card to install in the
list. An image of the card will be displayed.
b. Click and drag the image of the card to the Extension
or Trunk slot depending on the card type, and
release it. The card will move into the slot space.
3. Click Yes to confirm.
34 IP Networking Guide Document Version 2010-08
4.1.1 Installing the Virtual IP Cards to the PBX