Panasonic KX-NCP1000 - Configuration of the Activation Keys

Model No.
Activation Key Type Description
KX-NCP
Series
KX-TDE
Series
KX-NCS2249 CA Pro 128users Provides the activation key number and
registration ID to download the activation key
that enables the use of CA PRO for 128 users.
KX-NCS2301 CA Supervisor 1user Provides the activation key number and
registration ID to download the activation key
that enables the use of CA ACD Monitor for 1
ICD Supervisor.
Installing the Activation Key File in the SD Memory Card
1. Start the Maintenance Console from the Start menu.
2. From the Utility menu, select File Transfer PC to PBX (SD Card).
A dialog box will be displayed.
3. Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
4. Click OK.
5. Under Configuration, click Slot.
6. Click Activation Key.
7. For IP trunk activation key file(s), click Execute.
A confirmation message will be displayed. Click Yes.
Notice
The activation key file can only be installed in the PBX with the MPR ID number entered when the activation
key file was downloaded. The activation key file cannot be reissued unless the MPR card crashes.
Configuration of the Activation Keys
Depending on your configuration, it may be necessary to program the number of provided IP Trunk channels
to be used for H.323 CO lines. By default, all of the provided IP Trunk channels will be used for SIP CO lines.
Similarly, you can program how many IP softphones can be used through the IP Softphone/IP Proprietary
Telephone activation key. By default, only IP softphones can be used through the IP Softphone/IP Proprietary
Telephone activation key.
Document Version 2010-08 IP Networking Guide 37
4.1.2 Installing Additional Activation Keys