4.1.2 Installing Additional Activation Keys
If the preinstalled activation keys on the DSP cards are not enough for the desired configuration, it is necessary
to obtain additional activation keys in the form of activation key files and install them in the SD Memory Card.
Activation Key Code and Key Management System
To obtain additional activation keys, you need to purchase the appropriate activation key codes and access
the Key Management System. You can download the activation keys as an activation key file from the Key
Management System. To download the activation keys, enter the MPR ID number shown on the MPR card in
the PBX, and activation key number and registration ID provided on each activation key code.
The following activation key codes are available to enable the use of IP CO lines, IP telephones, and
Communication Assistant (CA).
Note that the types of activation keys are subject to change without notice. For CA activation keys, refer to the
documentation for CA.
Model No.
Activation Key Type Description
KX-NCP
Series
KX-TDE
Series
KX-NCS3102 KX-NCS4102 2 IP Trunk Provides the activation key number and
registration ID to download the activation key
that enables the use of 2 IP CO lines.
KX-NCS3104 KX-NCS4104 4 IP Trunk Provides the activation key number and
registration ID to download the activation key
that enables the use of 4 IP CO lines.
KX-NCS3201 KX-NCS4201 1 IP Softphone/IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 1 IP-PT/IP softphone.
KX-NCS3204 KX-NCS4204 4 IP Softphone/IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 4 IP-PTs/IP softphones.
KX-NCS3208 KX-NCS4208 8 IP Softphone/IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 8 IP-PTs/IP softphones.
KX-NCS3216 KX-NCS4216 16 IP Softphone/IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 16 IP-PTs/IP
softphones.
KX-NCS3501 KX-NCS4501 1 IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 1 IP-PT.
KX-NCS3504 KX-NCS4504 4 IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 4 IP-PTs.
KX-NCS3508 KX-NCS4508 8 IP PT Provides the activation key number and
registration ID to download the activation key
that enables the use of 8 IP-PTs.
Document Version 2010-08 IP Networking Guide 35
4.1.2 Installing Additional Activation Keys
To Next Page
Loading...
