To call
Press Left.
Press Up or Down
until desired number
appears.
Off-hook.
While on-hook
KX-NT300/KX-NT500/KX-DT300/KX-T7600/
KX-TCA185/KX-TCA285/KX-TCA385
• The
following PSs can display incoming call log information from other extensions (including
TIE) with same information as a PT connected to the PBX.
– KX-TCA185/KX-TCA285/KX-TCA385
• PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
• For details about referencing the incoming call log using the PS's navigator key, refer to the
PS's documentation.
To call with the REDIAL button
Display PT
Off-hook.
While on-hook
REDIAL REDIAL
Press REDIAL to
display the outgoing
call log.*
Press REDIAL
until desired number
appears.
• * System programming is required for this operation.
• This operation is available only for digital proprietary telephones with a display.
To store the caller’s information in personal speed dialing
Press STORE.
When the desired party is displayed
Display PT
AUTO DIAL
STORE
Document Version 2013-05 Operating Manual 155
1.4.2 Call Log, Outgoing
To Next Page
Loading...
