Caller Information Display before Call Pickup using DSS button
Depending on system programming, you can confirm the caller information of a call to another extension using
the DSS button before picking up the call. Pressing the corresponding DSS button will call the extension
receiving the call rather than picking up the call. While hearing the busy tone, you can check the caller
information on the display. You can pick up the call by pressing the same DSS button again.
Off-hook. Talk.
PT/PS
Press flashing DSS.
(DSS)
Press DSS again.
(DSS)
A busy tone is heard and the caller
information of the call to another
extension is displayed.
• If
you receive a call waiting tone, you can ask a third party to pick up your second call
with Directed Call Pickup.
Call Pickup Deny
You can deny or allow other people to pick up your calls.
Off-hook. On-hook.
Enter 1 to deny
or 0 to allow.
PT/SLT/PS/SIP Extn.
Deny
Allow
1
0
OR
Enter 720.
2 07
C.Tone
1.3.10 Call Splitting
When
talking to one party while the other party is on hold, you can swap the calls back and forth (alternately).
40 Operating Manual Document Version 2013-05
1.3.10 Call Splitting