Tone 2
• When there are messages that
have
previously been listened to
and no new messages recorded
by the SVM feature
• When any of the following
features are set:
• Absent Message
• Background Music
• Call Forwarding
• Call Pickup Deny
• Call Waiting
• Do Not Disturb
• Extension Dial Lock
• Executive Busy Override
Deny
• Hot Line
• Timed Reminder
Tone 3
• After pressing TRANSFER or
Recall/hookswitch to hold a call
temporarily (e.g., Call Splitting)
• When
the recording space of the
Simplified Voice Message
feature becomes almost full
• While a called PS is being
searched
• When Account Code Entry is
performed
• When answering a Timed
Reminder call with no message
• When answering an external
sensor call
Tone 4
Message waiting indication was
received.
When you make calls
Busy Tone
Reorder Tone
The CO line you tried to seize is not
assigned or denied.
Ringback Tones
Document Version 2013-05 Operating Manual 221
4.3.1 Tone
To Next Page
Loading...
