FWD/DND Settings Using Fixed FWD/DND Button
Using a proprietary telephone (PT), you can easily switch the FWD/DND status, and set the
forward destination for outside/intercom calls with the FWD/DND button
(fixed button). It is
also possible to set outside telephone numbers (e.g., your cellular phone) as forward
destinations for up to 4 Virtual PSs* in an Incoming Call Distribution (ICD) group, to ring
together with other ICD group members for calls to the group.
The following settings are available:
• Switching the FWD/DND status and setting FWD destination for outside/intercom calls
• Timer for "No Answer" and "Busy/No Answer
"
• Forwarding status (on/off) and outside destinations to ring in parallel for outside calls for up to 4 virtual PSs
in an ICD group
* Virtual PS
A virtual PS is a dedicated
extension number assigned to a
non-existent portable station
(PS)
to allow access to outside
destinations such as a cellular
phone.
Virtual PS
(Extn. No. 301)
Extn. 101
Talk
Dials 301
1
3
Forward to
outside destination
2
To switch FWD/DND status for outside calls
PT
FWD/DND
Press the fixed
FWD/DND
button.
While on-hook (when in FWD/DND Setting Mode)
The current FWD/DND status
for outside calls is displayed.
FWD/DND
Press the fixed
FWD/DND
button again to switch the status.
To switch FWD/DND status for intercom calls
PT
FWD/DND
Press the fixed
FWD/DND
button.
While on-hook (when in FWD/DND Setting Mode)
The current FWD/DND status
for intercom calls is displayed.
FWD/DND
Press the fixed
FWD/DND
button again to switch
the status.
2
Enter 2.
• When you switch the FWD/DND status, any FWD destination that was set previously is not
cleared.
Document Version 2013-05 Operating Manual 87
1.3.30 FWD (Call Forwarding)
To Next Page
Loading...
