Panasonic KX-NCP500 - Page 52

KX-NT300 series (except KX-NT321)
PBX IP Address
ENTER ENTER
Select "PBX". Select "PBX IP Address". Select "Primary PBX".
ENTER ENTER
To enter the IP address of the MPR card (PBX IP Address)
Press "SETUP"
when it is displayed.
SETUP
To start programming
Supply power to the IP-PT.
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
PBX IP Address
Software version 2.00 or later only
Select "Secondary PBX".
ENTER ENTER
To the VLAN settings
Press "STORE".
To end programming
To set VLAN parameters
OR
The IP-PT will reboot
and can then be
registered to the PBX.
STORE
52 IP Networking Guide Document Version 2010-08
4.5.1 Assigning the IP Addressing Information