Panasonic KX-NCP500 - Page 54

KX-NT265 (software version 2.00 or later only)
PBX IP
Address
To enter the IP address of the MPR card (PBX IP Address)
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
Press SP-PHONE
twice.
Press SP-PHONE.
To the VLAN settings
To end programming
To set VLAN parameters
OR
Press STORE.
The IP-PT will reboot
and can then be
registered to the PBX.
54 IP Networking Guide Document Version 2010-08
4.5.1 Assigning the IP Addressing Information