Panasonic KX-NCP500 - Page 56

To the VLAN settings
Press "STORE".
STORE
To end programming
To set VLAN parameters
OR
Return to the
Menu screen.
Return to the
Menu screen.
Continued from previous page
The IP-PT will reboot
and can then be
registered to the PBX.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)"
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
56 IP Networking Guide Document Version 2010-08
4.5.1 Assigning the IP Addressing Information