Panasonic KX-NCP500 - Page 67

KX-NT265
PBX IP
Address
To enter the IP address of the IP-EXT16 card (PBX IP Address)
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
Press SP-PHONE
twice.
Press SP-PHONE.
To the VLAN settings
To end programming
To set VLAN parameters
OR
Press STORE.
The IP-PT will reboot
and can then be
registered to the PBX.
Document Version 2010-08 IP Networking Guide 67
4.5.1 Assigning the IP Addressing Information